Creality Ender3 S1 Pro - Revision history

Gfc: /* Running a print */

2025-01-09T23:25:41Z

Running a print

← Older revision		Revision as of 23:25, 9 January 2025
Line 47:		Line 47:
	# Using Cura to create a gcode file out of an STL or other applicable file (See [[Cura Help#Basic Workflow\|Cura flow]] for more information)		# Using Cura to create a gcode file out of an STL or other applicable file (See [[Cura Help#Basic Workflow\|Cura flow]] for more information)
	# Make sure if you need support you used it!		# Make sure if you need support you used it!
	# After saving the gcode to a USB, plug in USB into the ~~Ultimaker~~		# After saving the gcode to a USB, plug in USB into the Ender 3D Printer
	# Change out the material as needed		# Change out the material as needed
	# Using the touchscreen menu on the ~~Ultimaker~~ go to Print and find your print		# Using the touchscreen menu on the Ender 3D Printer go to Print and find your print
	# Make sure you have enough material left in the current spool to finish your print		# Make sure you have enough material left in the current spool to finish your print
	# Click on your print to start it		# Click on your print to start it

Gfc: /* Specifications */

2024-09-18T21:30:33Z

Specifications

← Older revision		Revision as of 21:30, 18 September 2024
Line 11:		Line 11:

	== Specifications ==		== Specifications ==
			The build volume of the Creality Ender-3 S1 Pro 3D printer is 8.6 inches by 8.6 inches by 10.6 inches (220 mm x 220 mm x 270 mm).

			*Nozzle temperature: Up to 300°C
			*Heat bed temperature: Up to 110°C
			*Printing speed: Maximum 150 mm/s
			*Printing precision: ±0.1 mm
			*Layer height: 0.05–0.4 mm
			*Filament diameter: 1.75 mm
			*Data transmission method: Type-C USB/SD card
			*Nozzle quantity: 1
			*Nozzle diameter: 0.4 mm

	==Training==		==Training==

Gfc: /* Choosing a Material */

2024-09-18T21:23:37Z

Choosing a Material

← Older revision		Revision as of 21:23, 18 September 2024
Line 55:		Line 55:

	== Choosing a Material ==		== Choosing a Material ==
	While these printers can print a variety of materials, to simplify operations we ask you to use only PLA. ~~o wear~~		While these printers can print a variety of materials, to simplify operations we ask you to use only PLA on our shared Ender 3 S1 Pro printers.

	==Different Nozzles==		==Different Nozzles==

Gfc: /* Changing the Nozzle */

2024-09-18T21:22:50Z

Changing the Nozzle

← Older revision		Revision as of 21:22, 18 September 2024
Line 60:		Line 60:

	===Changing the Nozzle===		===Changing the Nozzle===

			If you require a different nozzle size or type, please ask a manager for more information.

	==Manuals==		==Manuals==

Gfc: /* Overview */

2024-09-18T21:21:17Z

Overview

← Older revision		Revision as of 21:21, 18 September 2024
Line 6:		Line 6:
	Fusion Deposition Modeling works by placing layers of melted material in a certain path over and over. Soon after the material is placed down, it hardens, allowing the next layer to be placed and stick on top. The path is determined by slicing an object and splitting it up into predetermined sized layers based on a setting in the editing software.		Fusion Deposition Modeling works by placing layers of melted material in a certain path over and over. Soon after the material is placed down, it hardens, allowing the next layer to be placed and stick on top. The path is determined by slicing an object and splitting it up into predetermined sized layers based on a setting in the editing software.

	When using ~~the Ender in~~ Sandbox we recommend ~~you use~~ [[#About Cura \| Cura]] software to slice your 3D objects in preparation for 3D printing.		When using any Sandbox 3D Printer we recommend [[#About Cura \| Cura]] software to slice your 3D objects in preparation for 3D printing. Our suggested workflow is for you to install Cura on your personal laptop and copy the sliced toolpath file to the Ender 3 S1 Pro using an SD card. The SD Card must stay in the printer so use one of our SD cards.

	We have multiple Creality Ender 3 ~~S1Pro~~ printers available. They operate on a first-come-first-served basis. This means that there is no queue to get in line for having your print started. The only way to '''ensure''' that you get your print done is to be at the printer when another print finishes. Our Makerspace culture is very congenial. We suggest you write a note and leave it near the printer you’d like to use.		We have multiple Creality Ender 3 S1 Pro printers available. They operate on a first-come-first-served basis. This means that there is no queue to get in line for having your print started. The only way to '''ensure''' that you get your print done is to be at the printer when another print finishes. Our Makerspace culture is very congenial. We suggest you write a note and leave it near the printer you’d like to use.

	== Specifications ==		== Specifications ==

Gfc: /* Specifications */

2024-09-18T21:16:19Z

Specifications

← Older revision		Revision as of 21:16, 18 September 2024
Line 11:		Line 11:

	== Specifications ==		== Specifications ==


	~~;Print head: Dual-extrusion print head with an auto-nozzle lifting system and~~
	~~swappable print cores~~
	~~;Build volume XYZ: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)~~

	~~;Filament diameter: 2.85 mm~~
	~~;Layer resolution:~~
	~~:<b>0.4 mm nozzle</b>: 200 - 20 micron. (Standard nozzle size)~~
	~~;XYZ resolution: 6.9, 6.9, 2.5 micron~~
	~~;Build speed: < 24 mm3/s~~
	~~;Build plate: Heated glass build plate~~
	~~;Build plate temperature: 20 - 140 °C~~
	~~;Build plate leveling: Active leveling~~
	~~;Preferred~~
	~~;Supported materials Optimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,~~
	~~TPU 95A, PP, PVA, Breakaway (Also supports third-party materials)~~
	~~In the box: Ultimaker Tough PLA Black 750 g, Ultimaker PVA 750 g~~

	==Training==		==Training==

Gfc at 22:43, 24 August 2024

2024-08-24T22:43:00Z

← Older revision	Revision as of 22:43, 24 August 2024
Line 1:	Line 1:
		[[Category:Tools]]
		[[File: \| center \| 400px]]
		== Overview ==
		The Creality Ender 3 S1 Pro is a consumer-grade [https://en.wikipedia.org/wiki/Fused_filament_fabrication FDM] (fused deposition modeling) 3D printer.

		Fusion Deposition Modeling works by placing layers of melted material in a certain path over and over. Soon after the material is placed down, it hardens, allowing the next layer to be placed and stick on top. The path is determined by slicing an object and splitting it up into predetermined sized layers based on a setting in the editing software.

		When using the Ender in Sandbox we recommend you use [[#About Cura \| Cura]] software to slice your 3D objects in preparation for 3D printing.

		We have multiple Creality Ender 3 S1Pro printers available. They operate on a first-come-first-served basis. This means that there is no queue to get in line for having your print started. The only way to '''ensure''' that you get your print done is to be at the printer when another print finishes. Our Makerspace culture is very congenial. We suggest you write a note and leave it near the printer you’d like to use.

		== Specifications ==


		;Print head: Dual-extrusion print head with an auto-nozzle lifting system and
		swappable print cores
		;Build volume XYZ: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)

		;Filament diameter: 2.85 mm
		;Layer resolution:
		:<b>0.4 mm nozzle</b>: 200 - 20 micron. (Standard nozzle size)
		;XYZ resolution: 6.9, 6.9, 2.5 micron
		;Build speed: < 24 mm3/s
		;Build plate: Heated glass build plate
		;Build plate temperature: 20 - 140 °C
		;Build plate leveling: Active leveling
		;Preferred
		;Supported materials Optimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,
		TPU 95A, PP, PVA, Breakaway (Also supports third-party materials)
		In the box: Ultimaker Tough PLA Black 750 g, Ultimaker PVA 750 g

		==Training==
		Before using a Creality printer, You must complete the training for the ultimaker S5 on the canvas course [https://umd.instructure.com/courses/1274047/pages/ultimaker-s5-3d-printer-introduction?module_item_id=9733814 here]

		==Trained Managers==
		The managers that have adopted this tool and can help you with using. Keep in mind these are not the only managers that know how to use this tool, feel free to ask any. Full list of adopted tools can be found here [[Manager Tool Adoption \| here]].
		<!-- This is for populating a list of all managers that have this tool as their adopted. -->
		{{#get_web_data:
		url=https://docs.google.com/spreadsheets/u/2/d/1OWqoa5hGArO427buM7213HOFsia-I8W9aUs01hW2Gpo/gviz/tq?tqx=out:csv&gid=0&tq=select%20F%20where%20G%20%3D%20%22Ultimaker%203D%20Printer%22
		\|format=CSV
		\|data=Manager=1
		}}
		{\| class="wikitable sortable"
		! Manager {{#for_external_table:<nowiki/>
		{{!}}-
		{{!}} {{{Manager}}}
		}}
		\|}

		== Running a print ==
		These are the very simple steps to be able to print on the Ultimaker after completing the training on elms.
		# Having an idea for a print
		# Create a 3D design of your idea using CAD software such as Fusion 360, SolidWorks, or even TinkerCAD.
		# Using Cura to create a gcode file out of an STL or other applicable file (See [[Cura Help#Basic Workflow\|Cura flow]] for more information)
		# Make sure if you need support you used it!
		# After saving the gcode to a USB, plug in USB into the Ultimaker
		# Change out the material as needed
		# Using the touchscreen menu on the Ultimaker go to Print and find your print
		# Make sure you have enough material left in the current spool to finish your print
		# Click on your print to start it
		# Hang around the sandbox at least until the first layer is done to make sure your print doesn't fail (Most of prints fail within the first layer)
		#* If your print fails then take it off and reprint it. If this continues to happen then ask a manager for help or try another print (Please don't waste materials failing the same print over and over)
		# Come back whenever your print is done and find it in the [[ IRB 1223 \| Prototype Room ]] and enjoy!

		== About Cura ==
		* Cura can be found for free on Ultimaker's website: [https://ultimaker.com/software/ultimaker-cura Cura Download]
		* More [[ Cura Help ]]
		* Cura allows 3D file formats: 3MF, OBJ, STL or 2D file formats: bmp, gif, jpg, png.
		* You can download Cura and prepare a print on you own computer and load it onto a flash drive for the Ultimaker
		* Possible ways of getting objects to print:
		** Finding and downloaded STL files from [https://www.thingiverse.com Thingiverse]
		** Create your own CAD files using a program like Solidworks, Siemens NX, Autodesk, or anything that will create the accepted file formats.

		== Choosing a Material ==
		While these printers can print a variety of materials, to simplify operations we ask you to use only PLA. o wear

		==Different Nozzles==

		===Changing the Nozzle===

		==Manuals==

Gfc: Created blank page

2024-03-13T17:15:44Z

Created blank page

New page