Engraved Glasses: Difference between revisions
Jump to navigation
Jump to search
Created page with "Using the ULS VLS 6.60 Laser Cutter you can engrave text or images onto the outside of a glass using the rotary attachment to the laser. The rotary attachment is usually l..." |
No edit summary |
||
| Line 1: | Line 1: | ||
Using the [[ULS VLS 6.60 Laser Cutter]] you can engrave text or images onto the outside of a glass using the rotary attachment to the laser. The rotary attachment is usually located underneath the laser cutter with the rotary attachment. The current cutter with the attachment is VLS #2. You can tell which laser cutter has the attachment by looking at the back right corner of the metal bed (may need to remove the black bed with holes/measurements on it) and there should be a metal clip with two U shaped stands there. | Using the [[ULS VLS 6.60 Laser Cutter]] you can engrave text or images onto the outside of a glass using the rotary attachment to the laser. The rotary attachment is usually located underneath the laser cutter with the rotary attachment. The current cutter with the attachment is VLS #2. You can tell which laser cutter has the attachment by looking at the back right corner of the metal bed (may need to remove the black bed with holes/measurements on it) and there should be a metal clip with two U shaped stands there. | ||
==== Example Glasses ==== | |||
Here are a few examples of the capabilities of using the rotary attachment to engrave different types of glasses. | |||
{{Gallery | |||
|title=Finished Engraved Glasses | |||
|align=center | |||
|width=120 |height=100 | |||
|File:Nats_champ_logo.jpg | |||
|File:Project_own_logo.jpg | |||
|File:Ucf_logo.jpg | |||
|File:Umd_logo.jpg | |||
|File:Unc_logo.jpg | |||
}} | |||
Revision as of 02:00, 18 December 2019
Using the ULS VLS 6.60 Laser Cutter you can engrave text or images onto the outside of a glass using the rotary attachment to the laser. The rotary attachment is usually located underneath the laser cutter with the rotary attachment. The current cutter with the attachment is VLS #2. You can tell which laser cutter has the attachment by looking at the back right corner of the metal bed (may need to remove the black bed with holes/measurements on it) and there should be a metal clip with two U shaped stands there.
Example Glasses
Here are a few examples of the capabilities of using the rotary attachment to engrave different types of glasses. Template:Gallery